
Choosing among metal roofing companies is easier when you know what real expertise looks like. A roof’s materials matter, but so does the company’s ability to match a metal roof system to your building and explain that choice in writing. MQ Roofing installs metal roofing, including standing seam and Pro-Rib, from its base in Tomah, WI, and serves homeowners in nearby communities. You can reach the team at (608) 553-3300.
This guide explains how to judge a metal roofing company’s expertise on the points that matter most, how exposed-fastener and concealed-fastener systems differ, and which questions belong in a written system specification.
Expertise of Metal Roofing Companies
Expertise is not a slogan on a website. It shows up as specific, accurate answers about how a metal roof will be built on your building. A company with real experience should be able to explain its recommendations plainly and put them in writing. The sections below cover the areas where that knowledge shows most clearly.
Quality of Materials and System Choice

Material quality starts with choosing the right system. Exposed-fastener panels, which include ribbed panels such as Pro-Rib, are typically screwed through the face of the panel. Concealed-fastener systems, such as standing seam, hide the fasteners under raised seams or clips. Neither is right for every roof. Exposed-fastener systems put fasteners and washers in the weather, so they need periodic checks. Concealed-fastener systems have more parts to detail and usually cost more. Our page on residential metal roofing describes the metal options MQ Roofing offers. A knowledgeable company asks about your roof before recommending either.
Roof Geometry, Movement and Substrate
Metal expands and contracts with temperature, so a good installation allows for movement in the panels, trim and flashing. Roof shape matters as well: valleys, hips, walls and penetrations all need detailed flashing. The surface under the panels matters too. The company should check the deck, say what underlayment is used and explain how any damaged decking will be handled and priced. If a company talks about panels but not these details, its expertise has not been shown.
Communication and Customer Service
Good communication means you know what is being built and what has changed. Ask how the company handles the first consultation, written proposals, schedule updates and the final walkthrough. Look for a named contact and a written scope rather than general promises. Expect the company to tell you what permits or local requirements apply, and confirm the details with your city or the state.
Warranty and Maintenance
Warranties on metal roofs usually come from two sources: the manufacturer, which may cover the panels or the paint finish, and the installer, which stands behind the workmanship. They cover different problems and may have different conditions. Ask each company to show both in writing before you sign. Also ask what maintenance is expected, such as checking fasteners, seams, flashing and drainage, and how the roof can be reached safely.
Expertise Checklist for Comparing Companies
Use the table to compare what each company can explain. A blank in one company’s answers is a question to settle before you compare prices.
| Area | What a knowledgeable company explains | Gap to watch for |
|---|---|---|
| Panel and fastening system | Explains the difference between exposed-fastener and concealed-fastener panels and why one fits your roof better | Recommends a system without asking about the roof’s shape, pitch or use |
| Movement | Describes how the panels, clips or fasteners, trim and flashing allow for temperature movement | Cannot say how long panels are handled or how movement is accommodated |
| Roof geometry | Identifies valleys, hips, walls and penetrations and says how each will be detailed | Treats a complex roof like a simple one |
| Flashing and trim | Lists the flashing at each detail and who makes and installs it | Flashing missing from the written scope |
| Substrate | Says what is under the panels, how the deck is checked and how problems found are priced | Assumes the deck is fine without looking |
| Maintenance access | Explains what to check, how often, and how the roof can be reached safely, including after snow and ice | Describes metal as maintenance-free |
| References | Offers a customer with a similar roof you can contact | Offers only a gallery of photos |
| Warranty | Separates workmanship terms from manufacturer terms and gives both in writing | A warranty claim with no written terms |
Questions for a Written System Specification
- Which panel and profile? Name the product, metal thickness and finish.
- How are panels attached? List the fastener or clip type, spacing and what they attach to.
- What is under the panels? Identify the deck, underlayment and any framing or repairs.
- How is movement handled? Ask how panels, trim and flashing are detailed to move with temperature.
- Which flashing and trim are included? Walls, valleys, vents and edges should each be listed.
- What is excluded? Deck repair, snow guards and gutters often appear in one bid and not another.
If two companies answer these questions differently, they are describing different roofs, and their prices should not be compared as if they were the same. Ask the contractor to show exactly how the selected standing seam or Pro-Rib system would be installed on your home.
Choosing a Metal Roofing Company
Choose the company that can explain its recommended system, puts it in writing and gives you references and warranty terms you can check. To talk through your own roof, contact MQ Roofing or call (608) 553-3300.
Frequently Asked Questions
How do I tell if a metal roofing company is experienced?
Ask it to explain the system it recommends, how it handles movement and flashing, and to provide references and written warranty terms.
Is a metal roof maintenance-free?
No. Fasteners, seams, flashing and drainage should be checked periodically and after severe weather, even though many owners find upkeep modest.
What is the difference between exposed-fastener and concealed-fastener metal roofing?
Exposed-fastener panels are screwed through the face, while concealed-fastener systems hide fasteners under seams or clips. The two have different installation details and maintenance needs.
How many metal roofing quotes should I get?
Three is practical. More only helps when each company prices the same panel system and scope.
